Добро пожаловать, Гость
Логин: Пароль: Запомнить меня

ТЕМА: HTC HD2 - cLK Install Manual

HTC HD2 - cLK Install Manual 28 мая 2013 08:33 #1

  • Mikhei777
  • Mikhei777 аватар
  • Не в сети
  • Администратор
  • Сообщений: 2533
  • Спасибо получено: 2667
  • Репутация: 1043
cLK Install Manual:

1st step:
Download zip with cLK and extract:
link, mirror
2nd step:
Open cLK_CWM_Recovery\fastboot_resize.bat in notepad and edit. You should edit system size.
fastboot oem part-add system:260 - replace "260" by your size (you can find needed size in the 1st post of the firmware thread).

3rd step:
Boot your phone into bootloader mode and run LeoAdvancedRUU.exe from cLK folder.

4th step:
Wait for phone boot and press "Back" button. Connect phone with PC. If your PC didn't find the drivers - install them manually:
link, mirror
5th step:
Runfastboot_resize.bat from cLK_CWM_Recovery folder (phone will reboot). Run fastboot_resize.bat 2nd time and wait for reboot again.
We are in cLK Menu. Run fastboot_install_recovery.bat from cLK_CWM_Recovery folder (Recovery will flash).

6t step:
Choose Recovery using Volume Buttons and press "Call" button. We are in Recovery.
Choose Full wipe (format cache, data, system partitions)
Choose Install zip from sdcard, then Choose zip from sdcard and select firmware zip (you must copy firmware zip to sdcard before you start). Firmware flashing will start.

During firmware install you will see this:
************************
CLK or MAGLDR installed?
Yes - For CLK Install   
No - For MAGLDR Install  
************************
Choose Yes using Volume buttons and press "Call" button to select Clk installing.

7th step:
After the firmware installed we should press "Back" button and select Reboot system now.
Phone will reboot and Android will start. First booting will be about 2-5 min.
Если есть вопрос - задай его в ЛС и не забудь сказать спасибо за помощь.
Последнее редактирование: 28 мая 2013 08:40 от Mikhei777.
Тема заблокирована.